|
Jumper Wires Premium 100-Pack |
These are 155mm premium jumpers with a 2.54mm (0.1") square crimped head in a pack of 100 -- half male-male and half female-... |
$17.95 |
|
|
Breadboard Jumper Wire 75-Piece Pack |
This is a flexible breadboard jumper wire in a 75-piece variety pack. Includes 4 different lengths in various colours: 200mm,... |
$3.95 |
|
|
Seeed JST 2 Pin power connector |
JST 2 Pin power connector
Compatible with Seeeduino and Solar Charging Shield power jack. This is different than the Sparkfun JST... |
$0.55 |
|
|
DC Jack To JST 2 Pin Converter |
DC jack to JST 2 pin converter, needed by Seeeduino, Seeeduino Stalker Wireless, and Seeeduino Mega. |
$1.95 |
|
|
Power converter 6 in 1 pack |
1X Barrel jack adaptor-screw terminal to 2.1mm male
1X Barrel jack adpator-Screw pluggable terminal to 2.1mm male
1X Barrel jack... |
$6.95 |
|
|
Jumper Wire - 0.1", 4-pin, 4" |
This is a simple four wire cable. Great for jumping from board to board or just about anything else. There is a 4-pin JST RE... |
$1.25 |
|
|
2x5 Pin IDC Ribbon Cable |
Simple IDC ribbon cable. Used for AVR programming, general communication, and all around handy-ness.
Note: Datasheet shows an... |
$2.55 |
|
|
USB Cable A To B (Arduino-Compatible) |
Standard issue USB 2.0 cables. This is the most common A to B Male/Male type peripheral cable. Compatible with most SFE designed... |
$2.95 |
|
|
3-Pin Female JST PH-Style Cable for Sharp Distance Sensors (30cm) |
A 3-pin JST style cable for use with Sharp Infrared Rangefinders. |
$1.45 |
|
|
Bus Pirate Cable |
This is an interface cable for the Bus Pirate, designed to connect to its 2x5 I/O header. The cable's connector is composed of... |
$5.35 |
|
|
IC Hook with Pigtail |
These are good quality IC test hooks with a male connection wire. Instead of a single hook, these have two hooks that are capable... |
$6.75 |
|
|
MIDI Cable - 6 Foot |
This one is for all you audio geeks out there. If you are going to play with MIDI accessories you'll likely need a cable. We have... |
$5.75 |
|