 |
Nema 17 Stepper Motor - 58 oz.in |
These steppers are a great way to get things moving, especially when positioning and repeatability is a concern. This is a NEMA... |
$19.95 |
|
 |
Dual Bearing V-Wheel Kit |
This is double bearing, Delrin, V wheel. It uses (2) 5×16×5 bearings and a precision shim washer. It has very low runout, so it... |
$7.20 |
|
 |
Ball Bearing 5mm Bore |
These are precision deep groove ball bearings with a 5mm bore, 5mm thick, and 16mm in outer diameter.
Specifications... |
$1.98 |
|
 |
5mm to 8mm Motor Shaft Coupler |
A motor shaft coupler that fits our stepper motors. Use this to connect to a lead screw or ball screw to create linear motion... |
$6.95 |
|
 |
MXL Timing Pulley with Dual Flange, 5mm Bore |
This is a 18 tooth MXL pitch (0.08") plastic pulley with metal insert and set screw. It has dual flanges. The bore is 5mm.... |
$10.80 |
|
 |
MXL Open Ended Timing Belt, 10cm |
An open ended MXL pitch timing belt for linear motion applications. Your order for multiple lengths will be cut at the total... |
$1.85 |
|
 |
Smooth Idler Wheel Kit 5mm Bore |
This is double bearing, Delrin, smooth idler wheel. It uses (2) 5×16×5 bearings and a precision shim washer. This is perfect for... |
$9.00 |
|
 |
M5 Eccentric Spacer |
This is a spacer that has an off center (Eccentric) 5mm hole drilled through it. It is used to tension V wheels against... |
$3.96 |
|
 |
Standard Wheel Carriage Plate |
This is a general purpose carriage for the MakerSlide linear rail. It has multiple mounting patterns for vertical and horizontal... |
$13.86 |
|
 |
MakerSlide Rail 1200mm |
Order only by request due to long size! Please contact us on the support form.
The MakerSlide, shown above, is an aluminum... |
$46.00 |
|
