Motors, Servos, Drivers
| Product | Price | |||
|---|---|---|---|---|
|
Pololu TReX Jr Dual Motor Controller | A Novel Blend of Serial, RC, And Analog Motor Control. This lower-power, smaller, and lower-cost version of the TReX is the... | $69.95 |
|
|
Stepper Motor with Cable | This is a simple, but very powerful stepper motor with a 4-wire cable attached. Features Step Angle (degrees) :1.8 2 Phase Rated... |
$15.95 On sale!
Reduced from
$17.25 |
|
|
Arduino Motor Shield Rev3 | The Arduino Motor Shield is based on the L298, which is a dual full-bridge driver designed to drive inductive loads such as... | $36.95 |
|
|
EasyDriver Stepper Motor Driver | Description: The EasyDriver is a simple to use stepper motor driver, compatible with anything that can output a digital 0 to 5V... | $14.95 |
|
|
Servo - Medium | Here is a simple, low-cost, high quality servo for all your mechatronic needs. Small servo with a standard 3 pin power, control... | $13.95 |
|
|
Stepper Motor - 60 oz.in (400 steps/rev) | These steppers are a great way to get things moving, especially when positioning and repeatability is a concern. This is a NEMA... | $19.95 |
|
|
Pan/Tilt Bracket | This pan/tilt bracket consists of two brackets and all the hardware you need to attach them to make a pan/tilt mechanism using... | $7.50 |
|
|
GWS S125 1T 2BB Sail Winch Servo | The GWS S125 1T 2BB Sail Winch Servo is a unique servo (typically used for radio control sail boats) that can rotate a full 360... | $32.95 |
|
|
25 Pin Male Solder Cup DB25 | A simple solder cup DB25 connector. Use this on PCBs as an edge mount connector for parallel port devices (programmers, stepper... | $1.10 |
|
|
Ardumoto - Motor Driver Shield | The new version of this shield allows for either 3.3 or 5v logic, a separate and more robust VIN connection, and the PWM input... | $24.95 |
|
|
Mini FET Shield | Developed by Dave Vondle and IDEO Labs, this board is essentially the same as our Power Driver Shield, but the through-hole parts... | $19.95 |
|
|
Pololu Jrk 21v3 USB Motor Controller with Feedback | The jrk 21v3 motor controller is a highly configurable brushed DC motor controller that supports four interface modes: USB, logic... | $59.95 |
|
|
Servo - Small | Here is a simple, low-cost, high quality servo for all your mechatronic needs. Small servo with a standard 3 pin power, control... | $10.35 |
|
|
N-Channel MOSFET 60V 30A | If you've ever wondered how to control the headlight of a car from a microcontroller, a MOSFET is what you need. The RFP30N06LE... | $1.60 |
|
|
Pololu Simple High-Power Motor Controller 24v23 | The Pololu Simple High-Power Motor Controller makes basic control of brushed DC motors easy, with our free Simple Motor Control... | $59.95 |
|

















